5. An open cylindrical vessel 0.60 mø, 0.90 m high and two-thirds filled with water, rotates about its vertical axis with a constant speed of 90 rpm, determine the following: a. The depth of water at the center of the vessel b. The total force on the cylindrical walls. c. The total force on the bottom of the vessel. O. 90m -0.60m

5. An open cylindrical vessel 0.60 mø, 0.90 m high and two-thirds filled with water, rotates about its vertical axis with a constant speed of 90 rpm, determine the following: a. The depth of water at the center of the vessel b. The total force on the cylindrical walls. c. The total force on the bottom of the vessel. O. 90m -0.60m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

B 4m 2m Hinge Water 50cm 420cm 30cm A closed cylindrical drum is 30cm in diameter and 50cm high as shown, contains a liquid (SG liquid = 0.83) and a depth of 20cm. The drum is then submerged in water and attached to a beam using a tension wire. Neglect the outer and inner thickness of the drum. To keep the beam in horizontal position, determine the following: a) The force "B" If the specific grawlty of the drum is 1.65; force "B" is Blank 1 KN b) The specific gravity of the d'um if the force B is 160 kg: SG of drun is Blank 2 Blank 1 Add your answer Blank 2 Add your answer
An equilateral triangular plate of side 2.4m placed horizontally in a liquid (SG=0.80) in such a way that the center of the plate is 2.5m below the free surface of water. Determine the area if the plate (in sq. meters). Determine the magnitude of the resultant force on the plate. (in kN)
centre of 11. A rectangular tank 4 m long, 1.5 m wide contains water upto a height of 2 m. Calculate the force due to water pressure on the base of the tank. Find also the depth of centre of pressure from free surface. [Ans. 117720 N, 2 m from free surface] 12. A rectangular plane surface I m wide and 3 m deep lies in water in such a way that its plane makes an angle of 30° with the free surface of water. Determine the total pressure and position of centre of pressure when the upper edge of the plate is 2 m below the free water surface. 13. A circular plate 3.0 m diameter is immersed in water in such a way that the plane of the plate makes an angle of 60° with the free surface of water. Determine the total pressure and position of centre of pressure when the upper edge of the plate is 2 m below the free water surface. [Ans. 809325 N, 2318 m] [Ans. 228.69 kN, 3.427 m from free surface] 14. A rectangular gate 6 mx 2 m is hinged at its base and inclined at 60° to the horizontal as shown…
В 4m 2m Hinge Water 50cm 20cm 30cm A closed cylindrical drum is 30cm in diameter and 50cm high as shown, contains a liquid (SG liquid = 0.83) and a depth of 20cm. The drum is then submerged in water and attached to a beam using a tension wire. Neglect the outer and inner thickness of the drum. To keep the beam in horizontal position, determine the following: a) The force "B" if the specific gravity of the drum is 1.65; force "B" is Blank 1 KN b) The specific gravity of the drum if the force B is 160 kg: SG of drum is Blank 2
Q-5 The dam in Fig. is a quarter circle 50 m wide into the paper. Determine the horizontal and vertical components of hydrostatic force against the dam and the point CP where the resultant strikes the dam. ! 20 m I P. -0 20 m Water
P4) Find the horizontal displacement at the roller. 15 kN/m C D E 6 m 9 m 25 kN 12 kN/m B A 12 m 5 m
A closed cylindrical container is filled with water having a pressure at the top of 196.2 kPa. It has a radius of 0.6m and a depth of 4m. If it is rotated at 200 rpm, determine the following:1. The total pressure on side wall, in kN.a. 1781.69 kNb. 1120.47 kNc. 1414.99 kNd. 1648.8 kN2. The total pressure at the top of the container, in kN.a. 186.7 kNb. 266.55 kNc. 320.1 kNd. 190.47 kN3. The intensity of hoop tension, in MPa if thickness of plate is 10mm. a. 18.006 MPab. 16.524 MPac. 18.865 MPad. 24.401 MPa
5 m When theta =-20 degrees, determine (a) the force exerted at B by the hydraulic cylinder BD. (b) the force exerted on the supporting carriage at A. 2.4m 200kg A 0.9 m 'O.5 m
The following shape represents a circular gate where the radius of arc AB=4m, distance BC=6m. If the tank is filled with oil (density = 700 Kg/m). Determine: %3! B Line of action Choose... The resultant force Choose... Horizontal forces Choose... on the gate
1. The boom of the wall crane 4m long is held at right angles to the wall by a wire that is attached to the wall 3m above the foot of the boom. If the load lifted is 45000N, find the tension in the wire and the compression force in the boom Neglect the weight of the boom. 2. A square is acted upon by the forces of 4, 6, 8, and 12N respectively along the four sides as shown. If the length of the side of the square is 0.5m, what is the resultant torque acting to rotate the square about an axis through A? jON 4N 12N 8N 3. Two people carry a heavy electric motor by placing it on a light board 2.00 m in length. One person lifts at one end with a force of 700N, and the other lifts the opposite end with a force of 500N. What is the weight of the motor, and where along the board is its center of gravity located? (Note: The center of gravity of an object is the point where the weight passes through.) 4. A uniform ladder 10m long and weighing 350N rests against a smooth wall at an angle of 30°…
2:41 Im 2. From the given coplanar force system which consists of two forces and one couple. Replace the force couple system with force acting at A. Figure: 35° 1 m 100 KN 100 KN y₁ 200 KN 50 KN 25° ||| 300 KN.m X 1.00 5G KB/S 50 اس ار59 a. Determine the resultant force acting at point A. b. Determine the Angle (direction) that the resultant R makes with the x-axis. c. Determine the x and y intercepts of the Resultant Force. d. Determine the resultant couple acting at point A.
Q4) The 250-kg, 10-m-wide rectangular gate shown in Figure is hinged at B and leans against the floor at A making an angle of 45° with the horizontal. The gate is to be opened from its lower edge by applying a normal force at its center. Determine the minimum force F required to open the water gate. Water A 45° F B Im 6m