I need the answer as soon as possible A 30cm diameter well fully penetrates an unconfined aquifer with saturatedthickness ho=60m and hydraulic conductivity K=9x10-3 m/min, calculate thedrawdown at point k and the drawdown at the pumping well, assume ro=120mnear an impervious boundary. The well is being pumped at a constant rate of1.5m3 /min.Impervious boudary50mPw30m35m

Answered: Image /qna-images/answer/937a0ce7-f53d-4ce9-ac8c-b3c5796495e8.jpg

A 30cm diameter well fully penetrates an unconfined aquifer with saturated thickness ho=60m and hydraulic conductivity K-9×10-3 m/min, calculate the drawdown at point k and the drawdown at the pumping well, assume ro3120m near an impervious boundary. The well is being pumped at a constant rate of 1.5m3 /min. Impervious boudary 50m Pw 30m k 35m

A 30cm diameter well fully penetrates an unconfined aquifer with saturated thickness ho=60m and hydraulic conductivity K-9×10-3 m/min, calculate the drawdown at point k and the drawdown at the pumping well, assume ro3120m near an impervious boundary. The well is being pumped at a constant rate of 1.5m3 /min. Impervious boudary 50m Pw 30m k 35m

Fundamentals of Geotechnical Engineering (MindTap Course List)

5th Edition

ISBN:9781305635180

Author:Braja M. Das, Nagaratnam Sivakugan

Publisher:Braja M. Das, Nagaratnam Sivakugan

Chapter6: Hydraulic Conductivity

Section: Chapter Questions

Problem 6.15P

See similar textbooks

Similar questions

A 12 inch diameter well was installed in an unconfined aquifer consisting of a 60 foot thick layer of sand. The water table was 15 feet below the ground surface before pumping of the well began. The well was then pumped at a rate of 30 gallons per minute and the water level in the well dropped to 45 feet below the ground surface after a steady-state condition was reached. The radius of well influence is 4000 feet. a) Calculate the permeability of the sand b) Compute and plot the drawdown surface
Question Two An unconfined aquifer with a well pumping 0.4m3/s and saturated thickness is 24m.lf the drawdown 50m from the well is 1m and the drawdown 100m from the well is 0.5m, calculate the hydraulic conductivity and transmissivity of the aquifer.The solution should include a labeled diagram.
Determine the following: a) hydraulic conductivity is ______ x10^3 cm/sec b) Transmissbility of the impermeable layer is _____ cm^2/sec c) The drawdown in the test well is ____ m
Don't copy from other solutions thank you. Three piezometers have been installed in the confined aquifer having a uniform thickness of 4.6 m. and hydraulic conductivity of 2 x 104 m/s. a) Compute the hydraulic grądient. b) Compute the transmissivity in m2/day. c) Compute the flow rate per unit width of the aquifer in liters/day.
Q2) A fully penetrating well of diameter 0.3 m is located in an uncontined aquifer of saturated depth 45 m. If the drawdown in the well is 15 m for the discharge of 1200 m³/day and the radius of influence is 300 m, compute hydraulic conductivity?
The wells shown below are in a leaky confined aquifer. The aquifer has a hydraulic conductivity of 30 ft/d, saturated thickness of 45.0 ft, and storage coefficient of 0.00080. The aquitard above has a thickness of 8.0 ft and vertical conductivity of 0.45 ft/d. Well A was turned on at noon Sunday with a flow rate of 150 gpm. Well B was turned on at noon Tuesday with a flow rate of 200 gpm. Find the total drawdown in ft at the observation well C at noon Thursday. 150 ft 350 ft 150 ft
Assignment no. 3 Problem # 1. A 300 mm diameter test well penetrates 24 m. below the static water table. After 24 hours of pumping at 69 liters/sec. The water level in an observation well at a distance of 96m from the test well is lowered 0.60m. And the other observation well at a distance of 34m from the test well, the drawdown is 1.2m. a. Compute the coefficient of permeability of the unconfined aquifer in m/day. b. Compute the transmissibility of the unconfined aquifer in m2/day. Compute the transmissibility of a confined aquifer 8m. thick below the unconfined aquifer in m2/day. I.
Need help with C. 8. An aquifer has a hydraulic conductivity of 12 ft/d and an effective porosity of 17% and is under a hydraulic gradient of 0.0055. (A) Compute the specific discharge. (B) Compute the average linear velocity. (C) The water temperature is 14°C and the mean pore diameter is 0.33 mm. Is it permissible to use Darcy's law under these circumstances? What is the reason for your answer?
6.8 Calculate the hydraulic detention time (0) of a CSTR with settled-solids recycle if Y = 0.6 g VSS,/g BOD,| ĝ = 20 g BOD,/g VSS,-d K = 20 mg BOD¸/1 b = 0.25/d f, = 0.8 S° = 10,000 mg BOD,/1 X_ = 4000 mg/1 X = 0 0. = 6 d Q = 1000 m³/d %3D Discuss the practicality of treating this rather high-strength soluble wastewater by this method.
2. An artesian well is pumped at the rate of 25 liters/sec. at observation wells 170m and 340m away the drawdowns noted are 0.83m and 0.67m respectively. The average thickness of the aquifer at the observation wells is 6.5 meters. Compute the coefficient of permeability of the aquifer if the water level was 15 meters before pumping. 340 m 170 m Q= 25 liters normal hyd. grade line 0.83 15m h2 hi impermeable layer t= 6,5 mm Aquifer
A 30 cm diameter well completely 15 points penetrates a confined aquifer of permeability of 45 m/day. The thickness of the aquifer is 20 m. Under steady state of pumping the drawdown at the well found to be 3.0 m and the radius of influence was 300 m. Calculate the discharge of the well * Pumping well dia = 2r + Original piezometric surface Piezometric surface under pumping Aquiclude Flow Confined aquifer Aquiclude Well Operating in a Confined Aquifer 1.548 m^3/min 0.0258 m^3/min 0.258 m^3/min 0.0851 m^3/min
Determine the drawdown at a distance of 50 m from a well pumping constantly at 50 US gpm after one year of pumping. The confined aquifer saturated thickness is 12 m, the hydraulic conductivity is 0.004 cm/s, and the storativity is 0.0004.