A chemistry graduate student is designing a pressure vessel for an experiment. The vessel will contain gases at pressures up to 80.0 MPa. The student's design calls for an observation port on the side of the vessel (see diagram below). The bolts that hold the cover of this port onto the vessel can safely withstand a force of 4.70 MN. pressure vessel bolts aide port Calculate the maximum safe diameter w of the port. Round your answer to the nearest 0.1 cm.

A chemistry graduate student is designing a pressure vessel for an experiment. The vessel will contain gases at pressures up to 80.0 MPa. The student's design calls for an observation port on the side of the vessel (see diagram below). The bolts that hold the cover of this port onto the vessel can safely withstand a force of 4.70 MN. pressure vessel bolts aide port Calculate the maximum safe diameter w of the port. Round your answer to the nearest 0.1 cm.

Name: A chemistry graduate student is designing a pressure vessel for an ex
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: A chemistry graduate student is designing a pressure vessel for an experiment. The vessel will contain gases at pressures up to 80.0 MPa. The student's designcalls for an observation port on the side of the vessel (see diagram below). The bolts that

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.112P: The inside surface of each thin shell carries a uniform normal pressure of intensity p0. Compute R,...

See similar textbooks

Similar questions

The inside surface of each thin shell carries a uniform normal pressure of intensity p0. Compute R, the magnitude of the resultant force for each case.
Q/ Iron cubr immersed in water Totel surface aket} 6 m' find areet the buoyaney force f the cub.
A spherical steel tank of 22 m diameter contains gas under a pressure of 300 kPa. The tank consists of two – half spheres joined together with a weld. What will be the tensile force across the weld? If the steel is 25.0 mm thick, what is the tensile stress in the steel?
You are being asked to determine the heights in tubes B and C (relative to z=0) given the following information: The specific weight of Air is Pair = 11.9N/m3 The specific weight of glycerine is Paiye = 12355N/m3 The specific weight of gasoline is Pgas = 6677N/m3 The gauge pressure at A is Pa = 1.6kPa The height of the tank of air is a = 1.7m The height of the tank of gasoline is y = 1.6m The height of the tank of glyercin is k = 0.95m A в с xm Air y m Gasoline k m Glycerin z = 0 As a HINT, you do not need to know the specific elevations of the tubes B and C entering their respective fluids, but you do need to account for this. Input the height the fluid rises in B to 2 decimal places here: (in metres) Input the height the fluid rises in C to 2 decimal places here: (in metres)
H.W: A hypodermic syringe contains a medicine with the density of water. The barrel of the syringe has a cross-sectional area (2.50x10-5) m2, and the needle has a cross-sectional area (1.00x10 8 ) m². In the absence of a force on the plunger, the pressure everywhere is 1.00 atm. A force F of magnitude 2.00 N acts on the plunger, making medicine squirt horizontally from the needle. Determine the speed of the medicine as it leaves the needles tip.
1. Find the density of an oil filled in the liquid column as shown in figure. Given that absolute pressure at the bottom is 675 kPa, atmosphere pressure is 1.0132 bar. where X=4m; Y = 4m, Z=1.5m. (Enter only the values in the boxes by referring to the unit given in the bracket. Do not send the hand written answer sheets to my mail) water oil Y Mercury The density of the oil = (unit in kg/m3) = %3D
The cylinder and tubing shown in Fig. 2-26 contain oil, sp gr 0.902. For a gage reading of 31.2 psi, what is the total weight of piston and weight W? The answer was given please show the solution. Answer: 136,800 lbs
Please read and solve carefully And circle your final answer for the Final temperature in Celsius and the final pressure in kPa
Consider the sealed containers (same fluid and on the same ground level) below with heights given in ? and ? values.Provided that ? = 2?, answer the following items. (refer to a.jpg) What container has the greatest pressure at the point indicated? Which point experiences the least pressure? Suppose the bottom pressure is evaluated, what container experiences the second highest pressure?
Three liquids of different densities fill connected tubes as shown in the figure below (not drawn to scale). The specific weights of two of the liquids are related by y2 = 3y1. Find y3 in terms of y1. Y1, 40 mm Y2 = 3Y1 60 mm 30 mm Y3
Show the complete solution and FBD
Problem Solving: Input your final answer on the space provide. Note: Use three decimal places and no need to input the unit. In Figure the 20°C water and gasoline are open to the atmosphere and are at the same elevation. What is the height h in the third liquid? - gasoline 1.5 m water h 1 m Liquid, SG=1.60 Ratio Ratio Fluld Agim - kg/m 1.05 E-4 1.51 E-5 Hydrogen 8.8 E-6 18 E-5 2.9 E-4 1.0 0.084 920 Air 2.1 1.20 130 Gasoline 33 680 4.22 E-7 3.7 Water 1O E-3 114 998 LOI E-6 8.7 Ethyl alcohol Mercury 1.2 E-3 135 170 789 1.52 E-6 13 1.5 E-3 13,580 1.16 E-7 1.0 SAE 30 oil 0.29 33,000 170,000 3.25 E-4 2,850 10,300 891 Glycerin 1.5 1,264 LI8 E-3 'I kel(m s)- 0.0209 slug/ft s); I m's- 10.76 n's.